IEC 62262 is an international standard that was created for the purpose of clarifying the capability of an enclosure to protect the contents from force.
 |
0 | No Protection |
 |
1 | Impact energy 0.150 Joules |
 |
2 | Impact energy 0.200 Joules |
 |
3 | Impact energy 0.350 Joules |
 |
4 | Impact energy 0.500 Joules |
 |
5 | Impact energy 0.700 Joules |
 |
6 | Impact energy 1.00 Joules |
|
7 | Impact energy 2.00 Joules |
|
8 | Impact energy 5.00 Joules |
|
9 | Impact energy 10.00 Joules |
|
10 | Impact energy 20.00 Joule |
IEC 60529 is an international standard that was created for the purpose of clarifying the capability of an enclosure to protect the contents from solid and liquid bodies.
 |
0 | No Protection |
 |
1 | Protected against solid bodies larger than 50 mm (e.g. a hand) |
 |
2 | Protected against solid bodies larger than 12 mm (e.g. a finger) |
 |
3 | Protected against solid bodies larger than 2.5 mm (tools, wires) |
 |
4 | Protected against solid bodies larger than 1 mm (fine tools, small wires) |
 |
5 | Protected against dust (no harmful deposits) |
 |
6 | Totally dust tight |
 |
0 | No Protection |
 |
1 | Protected against vertically falling water droplets (condensation) |
 |
2 | Protected against water droplets deflected at up to 15° from vertical |
 |
3 | Protected against rainwater at up to 60° from vertical |
 |
4 | Protection against water spray from all directions |
 |
5 | Protected against low - pressure water jets from all directions |
 |
6 | Protected against powerful water jets from all directions |
 |
7 | Protected against the effects of immersion |
 |
8 | Protected against prolonged effects of immersion under pressure |